GT-CTS10.1

No. The listed package contains Touch panel ×1, USB cable ×1, controller ×1; an LCD panel and computer are not included.

I²C/USB dual interface; USB

10 ms response time and >85% transmittance, with 4096 × 4096 touch resolution.

Include Industrial touch integration; other specific scenarios require project confirmation. Final selection still requires verification of the construction, dimensions and controller.

Provide the display active area, outline dimensions, thickness, FPC exit position, cover construction, interface and controller preference. Models with conflicting source fields, including the 24-inch listing, require drawing confirmation first.

It depends on your host. If you're connecting to a Windows IPC or doing quick prototyping, use USB — it enumerates as a standard HID, no driver work. If your board is a compact ARM SBC or MCU with tight space and low power budget, I²C connects straight to the mainboard over FPC, but you'll need the Linux/Android driver, slave address and interrupt pin defined before layout.

Yes. We can supply an I²C-to-USB bridge board so the touch module talks USB to the host while staying I²C-native on the sensor side. Just confirm the FPC pinout and we'll match the bridge.

Ghost touches usually come from SCL/SDA picking up noise from relays or VFDs — I²C has no differential rejection. Keep the FPC away from AC power lines, give the controller a low-impedance path to chassis ground, and use a shielded tail if the run is longer than 15 cm.

EETI's firmware includes adaptive noise suppression, glove touch, passive-stylus support, and water/reject tuning. For oily or gloved operators on a factory floor, we flash the noise-immunity profile before shipping so you don't tune it in the field.

Yes. With EETI tuning, standard PCAP handles up to about 4 mm glass cover; thicker tempered or anti-vandal lenses need the gain re-baselined. Tell us the exact lens stack-up (material + thickness + coating) before production so we set the threshold correctly.

Three options: AG (anti-glare) for overhead lighting, AF (anti-fingerprint) so coolant mist and gloves don't leave permanent smudges, AR (anti-reflection) for high-contrast reading. Most industrial 10.1" units take AG+AF combo. We can also add a shielding film if your enclosure has EMI certification targets.

Five things: (1) LCD active area and outline, (2) total stack thickness including cover glass, (3) FPC exit side and length, (4) interface — USB or I²C with host OS, (5) environment notes (glove/water/EMI/temperature). With those we return a drawing for sign-off before any tooling.